Lucent Technologies PARTNER MAIL Installation And Use Manual page 119

PARTNER MAIL Administration
6. Choose:
—
—
—
—
—
NOTE:
If you are changing more than one Selector Code, repeat from Step 5 now,
before going on to Step 7.
7.
Press [
The system plays the current Dial 0 / Timeout Action, followed by the Timeout
Option Menu.
6-20
Changing the Main Menus
Press [ 1 ] to select Action 1 — Selector Code Transfer.
The system prompts you to enter an extension number.
Enter an EXTENSION.
Go to step 7.
NOTE:
The Submenu and Announcement must exist before you can select
Actions 2 or 3.
Press [ 2 ] to select Action 2 — Play a Submenu.
The system prompts you to enter a submenu number.
Enter submenu number.
The system confirms the Selector Code and the Selector Code
Acton.
Go to step 7.
Press [ 3 ] to select Action 3 — Play an Announcement.
The system prompts you to enter an announcement number.
Enter announcement number.
The system confirms the Selector Code and the Selector Code
Action.
Go to step 7.
Press [ 4 ] to select Action 4 — Prompted Transfer.
The system confirms the Selector Code and Selector Code Action.
Press [ 5 ] to select Action 5 — Direct Extension Transfer.
The system confirms the Selector Code and Selector Code Action.
] [ # ] to approve all Selector Codes.