Lucent Technologies PARTNER MAIL Installation And Use Manual page 118

PARTNER MAIL Administration
Modifying the Main Menus
If you want to change the Selector Codes and Selector Code Actions that play for a
main menu, update form 5 or 6 then use the following instructions.
1. Access the Administration Main Menu as described in an earlier section.
The system plays the system programming options.
2. Press [ 3 ] for Automated Attendant.
The Automated Attendant Administration Menu plays.
3.
Choose:
— Press [ 1 ] to select the Day Main Menu.
— Press [ 2 ] to select the Night Main Menu.
4. Press [ 6 ] to modify the main menu.
The system prompts you to specify the Selector Code.
5. Enter a Selector Code [ 1 ] through [ 9 ].
— If the Selector Code is already assigned, the system asks you to press
— If the Selector Code is unassigned, the system prompts you to:
The Menu Definition Options play.
The Menu Definition Options play.
[ 9 ] to confirm that you want to modify it.
Enter an Action.
Changing the Main Menus
6-19