E3 Series, Cabinet A2 Assembly; 1: E3 Series, Cabinet A2 Installation - Honeywell Gamewell FCI S3 Series Manual

Installation Wiring

2.18 E3 Series, Cabinet A2 Assembly

The E3 Series, Cabinet A2 assembly (Part Number: E3BB-BA2/RA2) typically houses the following units:
• Backbox
• Inner Door
– LCD-SLP Display Panel
• Outer Door
– Door Insert
• Hardware Kit
2.18.1 E3 Series, Cabinet A2 Installation
Figure 2.18.1.1 illustrates the E3 Series, Cabinet A2 dimensions.
NOTE: Use the Hardware Kit provided with the E3 Series, Cabinet A2 assembly.
2.18.1.1 E3 Series Cabinet A2 Outer Door to Backbox Installation
To install the E3 Series Cabinet A2 outer door to the backbox, refer to the following.
1. Mount the outer door to the backbox.
2. Insert three nuts (#6-32) in the three-hole mounting pattern and secure the nuts from the outer door to the
left side of the backbox as shown in Locations 1, 2 and 3 in the figure below.
Figure 2.18.1.1.1 illustrates the E3 Series Cabinet A2, outer door to the backbox installation.
Figure 2.18.1.1.1 E3 Series Cabinet A2, Outer Door to Backbox Installation
40
– LCD-E3 (Optional)
.875"
3.00"
1.25"
1.00"
1.70"
1.20"
3.00"
10.00" 4.00" 7.46"
Figure 2.18.1.1 E3 Series, Cabinet A2 Dimensions
CABINET A2,
OUTER DOOR
3
2
1
S3 Series UL Listing Document — P/N LS10005-051GF-E:D3 3/09/2016
BACKBOX TOP
10.75"
BACKBOX
13.25"
11.25"
10.35"
1
3
CABINET A2,
BACKBOX
3
2
1
E3 Series, Cabinet A2 Assembly
2
4