5: Misc Menu Selection; 6: Log Menu Selection; 7: Info Menu Selection - Honeywell Gamewell FCI S3 Series Manual

Programming Options
5.2.5 MISC Menu Selection
This selection opens a "MISC OPTS" Menu that allows the user to change the RS-232 port baud rate. The user can override
the baud rate settings by using a DIP switch on the SLP board. The baud rate options are provided to allow the connection to
a variety of printers. Although this change is temporary, it doesn't change the configuration. Table 5.2.5.1 lists the available
Baud rates.
5.2.6 LOG Menu Selection
Table 5.2.6.1 lists the Log Menu selection and description.
Menu Selection
Display Log
Print Log
Clear Log
Sensitivity Report
5.2.7 INFO Menu Selection
This selection displays the Firmware Version and time/date of the last configuration change in the S3 Series System. It
shows a code for the type of the most recent configuration update. The INFO Menu provides the following:
1. The SLP's current Firmware Version and
Revision
2. The LCD-SLP's Firmware Version and Revision 9.
3. The Firmware Compile Date
4. The most recent configuration type
5. Time and date of the latest configuration
6. User-defined Installer ID
7. System Voltage
52
Baud Rates
• 115200 • 4800
• 19200 • 2400
• 9600 • 1200
Table 5.2.5.1 Baud Rates
Description
Opens the System Display to all events in the buffer memory.
Sends the entire buffer memory to the RS-232 port.
(Hard reset) will eliminate all events stored in the buffer memory.
Sends sensor sensitivity information to the RS-232 port.
Table 5.2.6.1 Log Menu Selection
S3 Series UL Listing Document — P/N LS10005-051GF-E:D3 3/09/2016
Programming Menu Selections
8. Battery Voltage
Charger Voltage
10. NAC1 EOL
11. NAC2 EOL
12. NAC3 EOL
13. NAC4 EOL