S3 Series System, Slp-Bb Cabinet Assembly; 1: Slp-Bb Cabinet Installation - Honeywell Gamewell FCI S3 Series Manual

Installation Wiring

2.14 S3 Series System, SLP-BB Cabinet Assembly

The SLP-BB (Smart Loop Panel-Backbox) (Part Number: SLP-BB) assembly typically houses the following
units:
• Backbox
– SLP Main Board
– SLC-PM/SLC95-PM
• Outer Door
– LCD-SLP Display Panel
– Door Insert
• Hardware Kit
2.14.1 SLP-BB Cabinet Installation
Figure 2.14.1.1 illustrates the SLP-BB cabinet dimensions.
Figure 2.14.1.2 illustrates the SLP-BB outer door and backbox installation.
To install the SLP-BB outer door to the backbox, refer to the following.
1. To mount the SLP-BB outer door to the backbox, insert four nuts (#6 Hex Kep) in the four-hole mounting
pattern and secure the nuts from the outer door to the left side of the backbox as shown in Locations 1, 2,
3 and 4 of Figure 2.14.1.2.
NOTE: Use the Hardware Kit provided with the SLP-BB Cabinet assembly.
1.25"
2.00"
11.00"
20.1/8"
Figure 2.14.1.1 SLP-BB Cabinet
34
– FLSP-7 Power Supply
– Batteries
14 1/2"
3.3/64" 4.00"
4.00"
1.25"
4 1/2"
15.1/2"
0.80"
2
1
14.45/64"
21 1/2"
3 4
1.3/32"
12.00"
1.25
"
1.3/32"
Dimensions
S3 Series UL Listing Document — P/N LS10005-051GF-E:D3 3/09/2016
S3 Series System, SLP-BB Cabinet Assembly
– RPT-E3-UTP (Optional)
– DACT-E3 (Optional)
SLP-BB CABINET
BACKBOX
SLP-BB CABINET
OUTER DOOR
1 ¼"
2"
7 3/32"
3 29/32"
Figure 2.14.1.2 SLP-BB Outer Door to
Backbox Assembly
4
3
2
20 1/8"H
1
4 1/2" D