Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for De Agostini Model Space Harley-Davidson FLSTF Fat Boy
Summary of Contents for De Agostini Model Space Harley-Davidson FLSTF Fat Boy
- Page 1 Harley-Davidson FLSTF Fat Boy Pack 19...
- Page 2 Stage 62: Completing the swingarm Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. Published in the USA by De Agostini Publishing USA, Inc., 915 Broadway, Suite 609, New York, NY 10010.
- Page 3 Harley-Davidson FLSTF Fat Boy: Assembly Guide S t a g e 6 0 From S tage 58 Fitting the Frame with engine gear change pedal With this stage, you receive the two pillion footrests, the switch for the tail light and three screws (two type F and one type K). To continue building your model, you will need the assembled gear change pedal from Stage 59 and the From S tage 59 engine block from Stage 58.
- Page 4 Harley-Davidson FLSTF Fat Boy: Assembly Guide Steps First, align the gear change pedal assembly by matching Attach the pedal assembly with a type F screw, Then, attach the end of the gear rod to the tip of tightened from the other side of the chassis using the cam.
- Page 5 Harley-Davidson FLSTF Fat Boy: Assembly Guide S t a g e 6 1 Your parts The swingarm Transmission housing Fuel tap With this stage, you receive the transmission housing, the fuel tap and two reflectors for the rear fender. In this stage’s assembly, you are working on the frame again and you will need the engine block assembly from the last stage.
- Page 6 Harley-Davidson FLSTF Fat Boy: Assembly Guide Steps Deflector supports Bring the left side of the swingarm to the engine block, Position the deflector on the three supports indicated Make sure the belt passes freely through the slots in the and pass the drive belt around the belt guard. by the arrows in the previous picture.
- Page 7 Harley-Davidson FLSTF Fat Boy: Assembly Guide S t a g e 6 2 From S tage 61 Completing the swingarm With this stage, you received the tail light and its components. Store them safely. In this stage, you complete the swingarm of your bike.
- Page 8 Harley-Davidson FLSTF Fat Boy: Assembly Guide S teps Insert the pillion footrest in its support, as shown. Secure the footrest with the type F screw Bring the footrest support to the chassis, aligning the mounting posts with the holes. Insert the 77.5mm axle from the right side of the Secure the axle on the left-hand side with its nut The swingarm is now complete.
- Page 9 Harley-Davidson FLSTF Fat Boy...
Need help?
Do you have a question about the Model Space Harley-Davidson FLSTF Fat Boy and is the answer not in the manual?
Questions and answers