Polycom VVX 410 Quick User Manual page 2

ABOUT CALLS
Only one call can be active at one time. You can use the handset, speaker phone, or
headset for calls. During a call, you can change modes by picking up the handset or by
pressing or
Calls view again.
Placing Calls
Pick up the handset, or press
Enter the phone number, and press Send.
Or enter the phone number first, then
press Dial, pick up the handset, or press
or .
• From Lines view: Press the phone Line
key, enter the phone number, and press
Send.
• From Home view: Select
the left and right arrow keys. Enter the
phone number, and press Send.
Answering Calls
To answer with the speaker phone, press
or tap Answer. To answer with the
handset, pick up the handset. To answer
with a headset, press
To answer a new call while on an active
call, press Answer.
held.
Forwarding Calls
To enable call forwarding, press
from Home or Lines view. Select the
forwarding type to enable, enter a
forwarding number, and press Enable.
To disable call forwarding, press
from Home or Lines view, select the
forwarding type to disable, and press
Disable.
To enable per-call forwarding: As your
phone rings, press Forward, enter the
forwarding number, and press Forward.
Page 2 | Knowledge Base: Polycom VVX 410 Quick User Guide
. If you navigate away from your call(s), press
or
New Call
.
The current call will be
Forward
Forward
Ending Calls
. To end an active call, replace the handset,
or press
To end a held call, navigate to
and highlight the held call. Press Resume,
and press
Holding Calls
From Calls
using Remember to highlight the call first. To
resume a held call, press
again.
Transferring Calls
From Calls
call the other party. When you hear the
ring-back tone, or after you talk with the
other party, press
Press Blind
waiting for the ring-back tone.
Placing Conference Calls
Call the first party, and after the call
connects, press More, and select Confrnc.
Then, dial and connect with the second
party and press
From Lines or Calls view, you can:
• Press
• Press
the call, but keep the other participants
connected.
• Press
each participant.
• Press
hold all participants.
to see
or . Or, press
End Call.
view, press Hold
Resume
view, press Transfer
Transfer
to complete a transfer without
Confrnc again.
Hold to hold all participants.
End Call to remove yourself from
Manage (if available) to manage
Split to end the conference and
Active Call or
End Call.
Calls view
or .
or
or , and
or again.