Table of Contents
Advertisement
3. Start LabChart
License Registration
1.
When you start LabChart for the first time, a dialog will appear asking you to
enter your license code. Your license code can be found on the LabChart CD
case. If you purchased LabChart Pro then both codes on the back of your CD
case should be entered in turn to unlock all the features of LabChart Pro.
2.
Enter your license details.
Device Discovery
On start-up, LabChart performs a Device Discovery process. It should automatically
detect the Human NIBP Nano device which will be indicated by a green tick mark. It
is recommended that the Human NIBP Nano
Interface is powered on BEFORE connecting the
Human NIBP Wrist Unit to the Interface. If the
device is not detected immediately click Device
Scan. If detection continues to fail aft er repeated
device scans see the Troubleshooting section in
the Owner's Guide.
License Activation
Activation is only required once per machine. If a supported PowerLab is already
connected and turned on, your license will activate automatically. Otherwise, you
may choose online or manual activation.
Welcome to LabChart!
LabChart's Welcome Center opens automatically when LabChart is launched.
1.
In the Getting Started tab of the Welcome Center, double-click to open the
Human NIBP settings file.
2.
You should see the device name appear at the top of the new document.
3.
The Start button should be enabled and you are now ready to start recording.
Advertisement
Table of Contents
