Table of Contents
Advertisement
Further resources
Statement of intended use
All products supplied by ADInstruments are intended for use in teaching and research
applications and environments only.
ADInstruments products are NOT intended to be used as medical devices or in medical
environments. That is, no product supplied by ADInstruments is intended to be used
to diagnose, treat or monitor a subject. Furthermore no product is intended for the
prevention, curing or alleviation of disease, injury or handicap.
This product meets the IEC60601-1 standard, under the principle that:
•
it is a more rigorous standard than other standards that could be chosen.
•
it provides a high safety level for subjects and operating personnel.
Avoiding injury to subjects and personnel
•
Finger cuff s shouldn't be applied to any body part other than the fingers.
•
Do not over tighten the Wrist Unit strap as that will cut off circulation to the
hand, leading to discomfort and measurement errors.
•
Do not wrap finger cuff s around a toe or the wrist of an infant.
•
For safe and reliable operation and optimal accuracy only use finger cuff s
manufactured by ADInstruments and FMS.
•
Physiological signals acquired by other devices, such as respiratory signals and
ECGs, can be connected to the ADInstruments PowerLab system for recording
while making blood pressure measurements using the Human NIBP Controller.
•
Note that any connected equipment has to meet the IEC specifications
(IEC601 for electromedical devices or IEC950 for data processing devices). The
configuration has to meet the IEC system standard (IEC601-1-1). Connection of
additional devices implies a responsibility to adhere to the IEC601-1-1 standard.
•
If any of the components of the Human NIBP System appear damaged in any
way, please contact your ADInstruments® representative.
Advertisement
Table of Contents
