Table of Contents
Advertisement
Overview
This guide will help you to quickly set up the Human NIBP Nano System. For detailed
installation and set up instructions and troubleshooting information, please refer to
the Owner's Guide (also available at www.adinstruments.com/support/manuals).
The Human NIBP Nano System contains the following:
•
Human NIBP Nano Wrist Unit
•
Height Correction Unit
•
LabChart Pro® and Human NIBP Device Enabler soft ware CDs
•
Human NIBP Nano Interface and USB cable and power cable
The Human NIBP Nano Wrist Unit is manufactured by Finapres Medical Systems
(FMS) B.V. (www.finapres.com) for distribution by ADInstruments, and for use with
ADInstruments soft ware. Finger cuff s are purchased separately:
•
Finger Cuff (Large, for finger circumferences 65-75 mm)........................... MLT382/L
•
Finger Cuff (Medium, for finger circumferences 55-65 mm)....................... MLT382/M
•
Finger Cuff (Small, for finger circumferences 45-55 mm)........................... MLT382/S
System Requirements
Windows
•
A PC capable of running LabChart 8.1.8 or above. For detailed system
requirements please see https://www.adinstruments.com/support/system-
requirements.
PowerLab not required
•
An ADInstruments PowerLab is not required to use the Human NIBP Nano System
with LabChart, but you can record data simultaneously into LabChart using a
PowerLab and the Human NIBP Controller.
Advertisement
Table of Contents
