ADInstruments Human NIBP Nano Quick Start Manual page 15

Product Purchase and License Agreement
This Agreement is between ADInstruments NZ Ltd ['ADI'] and the purchaser ['the Purchaser']
of any ADI product or solution — software, hardware or both — and covers all obligations and
liabilities on the part of ADI, the Purchaser, and other users of the product. The Purchaser (or
any user) accepts the terms of this Agreement by using the product or solution. Any changes
to this Agreement must be recorded in writing and have ADI's and the Purchaser's consent.
Responsibilities
The Purchaser and any others using any ADI product or solution agree to use it in a sensible
manner for purposes for which it is suited, and agree to take responsibility for their actions
and the results of their actions. If problems arise with an ADI product, ADI will make all
reasonable efforts to rectify them. This service may incur a charge, depending on the nature
of the problems, and is subject to the other conditions in this Agreement. ADI does not
separately warrant the performance of products, equipment or software manufactured by
third parties which may be provided to Purchaser as part of an overall solution. However, as
further noted below, ADI will pass through to Purchaser all applicable third party warranties
to the extent it has the right to do so.
Statement of Intended Use
Products supplied by ADInstruments are intended for use in teaching and research
applications and environments.
Products supplied by ADInstruments are NOT intended to be used as medical devices or in
medical environments. That is, no product supplied by ADInstruments is intended to be
used to diagnose, treat, or monitor a subject. Furthermore no product is intended for the
prevention, curing or alleviation of disease, injury or handicap.
Where a product meets IEC 60601-1 it is under the principle that:
1. it is a more rigorous standard than other standards that could be adopted and
2. it provides the most appropriate safety level for subjects and operators.
The choice to meet IEC 60601-1 is in no way to be interpreted to mean that a product:
1. is a medical device;
2. may be interpreted as a medical device;
3. is safe to be used as a medical device
ADI Product Hardware Warranty
ADI warrants that PowerLab Data Acquisition Units (PL prefix)
shall be free from defects in materials and workmanship for five (5) years from the date of
purchase. Other PowerLab Data Acquisition Units
1 and Front-ends (FE prefix)
3 4
, Front-ends and Pods
2
5
shall be free of