Advertisement
W
iring diagram
Fig. D-3
Wiring through Line filter
Pass Field lead wires (orange, purple)
through Line filter as drawn below.
And put it to the place as drawn right.
One hole type
Setting and Wiring of Noise suppressor
and Resistance
Facing the wire connected side to Switch handle set L,
set Noise suppressor and Resistance to the handle.
[Right]
Resistance
Noise
suppressor
Switch handle set L
Wiring in Switch handle L
with Radio interference suppression
Two holes type
Put Field lead wires between Rib and
the inner wall of Switch handle L.
[Wrong]
Line filter
Inner wall
Resistance
Noise
suppressor
(If it is used.)
P 8/ 8
Rib
Switch
Closed end splice
Put Closed end splice
to the place here.
Terminal block
(If it is used.)
Be careful not to put
any lead wires under
Terminal block.
Advertisement
