Engineering Application Functions Operated Through The Yap1F Remote Controller - Gree GMV-ND100L/A-T Service Manual

GREE
5.5 Engineering Application Functions Operated through the
YAP1F Remote Controller
The YAP1F remote controller only provides engineering application functions for setting the master
IDU. For other user operation functions, refer to the "Remote Controller Operating Instructions".
The method for setting the master IDU through the YAP1F remote controller is as follows:
No. Button name
1 ON/OFF
2 TURBO
3 MODE
4
5 I FEEL
6 TEMP
7
8 LIGHT
9 X-FAN
10 SLEEP
11 CLOCK
12 TOFF
13 TON
14
15 FAN
16 /
(For details about the above figures, refer to the instructions 66174100016.)
Perform settings by pressing "▲" and "▼" in air supply mode:
① Set the temperature to 30° C.
② Press "▼" and then "▲" in five seconds. Repeat this operation for three times.
③ After successful settings, "UC" is displayed on the receiving indicator panel of the remote
controller for five seconds and"MASTER" is displayed on the wired controller.
Turn on or turn off the unit
Set turbo function
Set operation mode
Set up&down swing status
Set I FEEL function
Switch temperature displaying type on the unit's display
Set health function and air function
Set light function
Set X-FAN function
Set sleep function
Set clock of the system
Set timer off function
Set timer on function
Set left&right swing status
Set fan speed
Set temperature and time
85
GMV5 INDOOR UNIT SERVICE MANUAL
Function