Gree GMV-ND100L/A-T Service Manual page 67

GREE
Parameter
Parameter Name
Code
Preferential
C06
operation query
Indoor
C07 environment
temperature query
Prompt time query
C08 for air filter
cleaning
Wired controller
C09
adress query
Indoor unit
quantity query in
C11
one-to-many
mode
Outdoor
C12 environment
temperature query
Indoor relative
C17
humidity query
Parameter
Range
Operation method:
In "C06" status, press the "MODE" button to enter the
preferential operation query interface. Press " " or " " to
00: common
switch the IDU SN.
operation
Display mode:
01: preferential
Temperature area: displays the project number of the current
operation
IDU.
Timer area: displays the preferential operation setting value of
the current IDU.
Operation method:
In "C07" status, press the "MODE" button to enter the indoor
environment temperature query interface. Press " " or " " to
switch the IDU SN.
- Display mode:
Temperature area: displays the project number of the current
IDU.
Timer area: displays the temperature value of the indoor
environment temperature sensor after replenishment.
4-416: days Timer area: displays the prompt time for air filter cleaning.
01, 02 Timer area: displays the adress of the current wired controller.
Timer area: displays the number of IDUs controlled by the
1-16
wired controller.
Timer area: displays the temperature value of the environment
-
temperature sensor of the master ODU.
Operation method:
In "C17" status, press the "MODE" button to enter the indoor
relative humidity query interface. Press "▲" or "▼" to switch
the IDU SN.
Display mode:
20-90 Temperature area: displays the relative humidity value.
Timer area: displays the project number of IDU (project
numberes are arranged from small to large).
If the HBS network consists of only one IDU, the timer area
directly displays the IDU relative humidity value in the "C17"
interface.
62
GMV5 INDOOR UNIT SERVICE MANUAL
View Method