Gree GMV-ND100L/A-T Service Manual page 178

GREE
Motor and fan
Precondition: The power supply has been disconnected.
Step
4. Remove the motor.
5. Install a new motor.
GMV-NX224P/A(X2.0)-M, GMV-NX280P/A(X2.5)-M, GMV-NX280P/A(X3.0)-M
Motor and fan
Precondition: The power supply has been disconnected.
Step
1.Remove the line
connecting to the motor.
2. Remove the cover plate
assembly
3. loosen the strap, Remove
the motor cover plate
4. Remove the motor.
Diagram
Diagram
GMV5 INDOOR UNIT SERVICE MANUAL
173
Operation Procedure
●Remove the motor from the
support and remove the louver
from the motor axle. Then,
remove the motor.
●Assemble units based on the
reverse order of this procedure
and power on the units for test.
Operation Procedure
●Use a screwdriver to unscrew the
electric box cover.
●Remove from the master board
the line connecting to the motor
and remove the tie.
●Use a screwdriver to unscrew the
bolt to fixure the cover plate.
●loosen the strap, Use a
screwdriver to unscrew the bolt to
fixure the cover plate.
●Remove the motor from the
support and remove the louver
from the motor axle. Then, remove
the motor.