Gree GMV-ND100L/A-T Service Manual page 180

GREE
Motor and fan
Precondition: The power supply has been disconnected.
Step
2. Remove the filter. And the
air return cover plate.
3. Remove the rear
propeller housing and
Remove the front propeller
housing.
4. Remove the motor.
5. Install a new motor.
GMV-NDX224P/A-T, GMV-NDX250P/A-T, GMV-NDX280P/A-T
Motor and fan
Precondition: The power supply has been disconnected.
Step
1. Remove the cover plate
component.
2. Remove the line
connecting to the motor.
Diagram
Diagram
175
GMV5 INDOOR UNIT SERVICE MANUAL
Operation Procedure
●Remove the filter from the air
return frame.
●Use a screwdriver to unscrew the
air return cover plate.
●Loosen the fasteners that
connect the rear propeller housing
with the front propeller housing
and remove the rear propeller
housing.
●Use a screwdriver to unscrew the
front propeller housing and then
remove the propeller housing.
●Remove the motor from the
support and remove the louver
from the motor axle. Then, remove
the motor.
●Assemble units based on the
reverse order of this procedure
and power on the units for test.
Operation Procedure
●Use a screwdriver to unscrew the
cover plate component.
●Use a screwdriver to unscrew the
electric box cover.
●Remove from the master board
the line connecting to the motor
and remove the tie.