6. Maintenance
Cleaning Instructions
With the system turned OFF, wipe down all surfaces with a damp cloth. Mild soap and water can
be used to remove stains and scuff marks. Pay particular attention to the upholstery that can be
damaged by exposure to perspiration and other body fluids.
NOTE: DO NOT use cleaning solutions containing ammonia or alcohol to clean upholstery. Mild
soap and water should be sufficient. Allow the system to dry thoroughly before resuming
testing, rehab or activity sessions.
A leather cleaner/conditioner can be used monthly on all upholstery.
Hardware
As needed, inspect all locking and adjustment mechanisms for signs of wear or damage.
If there are any questions or if further assistance is required, contact the Customer Service
Department.
Disposal
An appropriate waste disposal company is to be contacted (i.e., the local collection point for
waste separation). Properly dispose of the device at the end of its service life:
The device packaging is disposed of through resource recycling.
•
The metal parts of the machine go to scrap metal disposal.
•
Plastic parts are disposed of as hazardous waste.
•
The disposal of equipment must be in accordance with the respective
national regulations.
Wear parts are considered hazardous waste! After being replaced, wear
parts must be disposed of according to country-specific waste laws.
20