Table of Contents
Advertisement
3. Maintenance and Cleaning
The Biodex Surgical C-Arm Table is virtually maintenance free. By following the instructions
below at suggested time intervals, or as often as necessary, the table will remain in "like new"
condition.
1. As required, cleanse all exterior surfaces and tabletop pads with a mild detergent solution,
such as Parker Laboratories Protex Disinfectant or any one-step disinfectant that does not
contain bleach.
2. Keep wheel assemblies free of foreign materials and dirt accumulation.
3. Periodically inspect all welds.
4. Periodically check bolts on table, tighten if necessary.
5. Periodically inspect all strap holders. Any holder that feels loose should be removed and
reattached after adding a spot of Loctite® Threadlocker (Blue #242) to the bolt threads. This
should ensure that the bolt will not loosen
CAUTION: Disconnect power from source before removing panel or covers. Reliable
grounding achieved only by connecting this unit to an equivalent marked hospital
only or hospital grade receptacle.
Disposal
An appropriate waste disposal company is to be contacted (i.e., the local collection point for
waste separation). Properly dispose of the device at the end of its service life:
The device packaging is disposed of through resource recycling.
•
The metal parts of the machine go to scrap metal disposal.
•
Plastic parts are disposed of as hazardous waste.
•
The disposal of equipment must be in accordance with the respective
national regulations.
Wear parts are considered hazardous waste! After being replaced, wear
parts must be disposed of according to country-specific waste laws.
17
Advertisement
Table of Contents
