Canon MX450 Series Online Manual page 453

Hide thumbs Also See for MX450 Series:
Table of Contents

Advertisement

They are internetwork-layer protocol used on the internet. IPv4 uses 32-bit addresses and IPv6 uses 128-bit
addresses.
K
• Key Format
Select either ASCII or Hex as the WEP key format. The character that can be used for the WEP key differs
depending on the selected key formats.
• ASCII
Specify with a 5 or 13-character string that can include alphanumeric and underscore "_" characters. It is case-
sensitive.
• Hex
Specify a 10-digit or 26-digit string that can contain hexadecimal (0 to 9, A to F, and a to f).
• Key Length
Length of the WEP key. Select either 64 bits or 128 bits. Longer key length allows you to set a more complex WEP
key.
L
• Link Quality
The status of connection between the access point and the printer excluding noise (interference) is indicated with a
value from 0 to 100%.
• LPR
A platform-independent printing protocol used in TCP/IP networks. It is not supported bidirectional communication.
M
• MAC Address
Also known as the physical address. A unique and permanent hardware identifier that is assigned to network devices
by its manufacturer. MAC addresses are 48 bits long and are written as a hexadecimal number separated by colons,
i.e., 11:22:33:44:55:66.
O
• Operation Status
Indicates the status on whether the printer can be used.
P
• Proxy server
A server that links a LAN-connected computer to the Internet. When using a proxy server, specify the address and
the port number of the proxy server.
• PSK
An encryption method employed by WPA/WPA2.
R
• Router
A relay device to connect to another network.
195

Advertisement

Table of Contents
loading

Table of Contents