Firmware Update - Canon MX450 Series Online Manual

Firmware update

You can update the firmware of the machine, check the firmware version, or perform settings of a DNS server and a proxy
server.
Note
Only Current version is available when WLAN inactive is selected for WLAN activ./inactiv. in LAN settings.
• Install update
Performs the firmware update of the machine. If you press the OK button and select Yes, the firmware update starts.
Follow the on-screen instructions to perform the update.
Important
When you use this function, make sure that the machine is connected to the Internet.
If the firmware update is carried out, all faxes stored in the machine's memory are deleted.
You cannot start the firmware update under the following conditions:
While the machine is sending or receiving a fax
While the machine is storing the unprinted fax in machine's memory (memory reception)
When the unsent faxes are stored in the machine's memory
Note
If the firmware update is not complete, check the following and take an appropriate action.
Check the network settings such as an access point or a router.
If Cannot connect to the server; try again is displayed on the LCD, press the OK button, then try again
after a while.
• Current version
You can check the current firmware version.
• DNS server setup
Performs settings for a DNS server. Select Auto setup or Manual setup. If you select Manual setup, follow the
display on the LCD to perform settings.
• Proxy server setup
Performs settings for a proxy server. Follow the display on the LCD to perform settings.
128