Canon MX450 Series Online Manual page 401

Hide thumbs Also See for MX450 Series:

Table of Contents

If all encryption types of the access point, printer, or computer do not match, the printer cannot communicate

with the computer. If the printer cannot communicate with the computer after the encryption type of the printer

was switched, make sure that encryption types for the computer and the access point matches that set to the

If you connect to a network that is not protected with security measures, there is a risk of disclosing data such

as your personal information to a third party.

TCP/IP Setup:

Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your network environment.

After changing configuration, a screen is displayed asking you for confirmation before the settings are sent to the

printer. If you click Yes, the settings are sent to the printer and the Transmitted Settings screen is displayed.

Changing the network settings with the USB cable temporarily may switch the default printer. In this case, reset

Set as Default Printer.

Troubleshooting