Network Setup; Connect To Awlan Network; Disconnect From Awlan Network - Launch Diagun v X-431 Manual

LAUNCH

3 Network Setup

*Note: If you don't need to use WLAN for a while, you can turn it off to conserve
battery life.
The tablet has built-in WLAN module that can be used to get online. Once you're
online, you can register App, surf the Internet, get apps, send email, and check
for software updates etc.
3.1 Connect to a WLAN network
1. On the home screen, tap Settings -> WLAN.
2. Slide the switch to ON, the tablet will start searching for all available wireless
networks.
3. Select a desired wireless network,
If the chosen network is open, the tablet will connect automatically;
If the selected network is encrypted, a network password will need to be
entered.
4. When "Connected" appears, it indicates the WLAN connection is complete.
*Note: When WLAN is not required, this should be disabled to conserve battery power.
When this tool is in range, it will connect to the previously linked network
automatically.
3.2 Disconnect from a WLAN network
1. On the home screen, tap Settings -> WLAN.
2. Tap the network with a Connected status, then tap "Disconnect".
11
Network Setup