Launch X431 V Manual

How to restore to factory settings

Hide thumbs Also See for X431 V:

How to restore X431 V (X431 Pro) to factory settings

Read this before operation:

1) the following method does not apply to X431 V+ and

X431 Pro3

2) Please use this function carefully, improper operation

may cause the dead of X431 V, besides, after the factory

settings are restored, all user data will be deleted.

Step – by –Step Operation:

Step 1: Make sure power supply is 100% (at least 60%

power or above), and shutdown X431 V.

Step 2: Long press the power button and volume up button

at the side of

to the menu as shown in the following Picture A.

, to open the machine, and then come

X431 V

Table of Contents

Do you have a question about the X431 V and is the answer not in the manual?

Page 1 How to restore X431 V (X431 Pro) to factory settings Read this before operation: 1) the following method does not apply to X431 V+ and X431 Pro3 2) Please use this function carefully, improper operation may cause the dead of X431 V, besides, after the factory settings are restored, all user data will be deleted.
Page 2 Picture A Step 3: In this menu, power button = Enter key, volume button = up and down key. Press volume button move to line 5 "wipe data/factory reset", and press power button to confirm. At this time, come to the next menu shown as following picture B, press volume button move to the line with "Yes", press power button to confirm.
Page 3 Picture B Step 4: After this step done, it will back to the menu of picture A, then move to "wipe cache partition ". Step 5: Finally, move to “reboot system", confirm and reboot the machine, then X431 pro is restored to factory settings.

X431 pro