System Components, Tools And Equipment; What Is Required For Mounting - BayWa novotegra closed II Mounting Instructions

4 System components, tools and equipment

4.1 What is required for mounting

Figure
* The components vary depending on the requirements of the roof, the structural analysis and the choice of
components and may deviate from the images above.
Subjects excepted. Illustrations are exemplary and may vary from the original.
V3.3 - April 2020/ASc,
Copyright BayWa r.e. Solar Energy Systems GmbH
Tool Component*
Base trough 150-30
Material: Aluminium
Base trough connector 150-30 I
Material: Aluminium
Tool: Socket bit AF 8 mm
Base trough expansion joint 150-30
Material: Aluminium and stainless
steel
Tool: Socket bit AF 8 mm
Base foot set
Material: Aluminium
Module support set 13°
Material: Aluminium
Flat roof mid clamp
Material: Aluminium and stainless
steel
Tool: Socket bit AF 8 mm
Flat roof end clamp
Material: Aluminium and stainless
steel
Tool: Socket bit AF 8 mm
Flat roof end clamp (short side)
Material: Aluminium and stainless
steel
Tool: Socket bit AF 8 mm
Wind deflector 13°
Material: Aluminium
Tool: Socket bit AF 8 mm
Flat roof mounting screw chipless
Material: stainless steel
Tool: Socket bit AF 8 mm
Aluminium edge protector self-
adhesive
Material: Aluminium
Product group
Profile rails
Rail connectors and
expansion joints
Rail connectors and
expansion joints
Module elevation
Module elevation
Module elevation
Module elevation
Module elevation
Module elevation
Fastening equipment
Sealing parts and
protective devices
5