Mounting System Components - Optional - BayWa novotegra closed II Mounting Instructions

4.3 Mounting system components – optional
Image
*** Optionally available installation system components, e.g. for improving the aesthetics of the system,
cable management or grounding of the installation system.
Subjects excepted. Illustrations are exemplary and may vary from the original.
V3.3 - April 2020/ASc,
Copyright BayWa r.e. Solar Energy Systems GmbH
Tool Component***
Ballast trough
Material: Aluminium
Coupling profile C47 385 mm
Material: Aluminium
Tool: Socket bit AF 8 mm
Base trough cable bracket
Material: Plastic
Top cover base trough 150-30
3.00 m
Material: Aluminium
Cable-tie clip for profile flange
Cable clip d = 10 mm
Grounding connector set AF 18
Material: stainless steel
Tool: Special lock nut AF 18 deep
Perforated Alu-tape 10,000 x 20 x 1
Material: Aluminium
Tool: Socket bit AF 8 mm
Mounting-Set Optimizer FR
Contact latch module clamp
Product group
Module elevation
Profile rails
Cable management
Module protection
and rail top cover
Cable fixing
Cable fixing
Accessories and
optional components
Accessories and
optional components
Accessories and
optional components
Accessories and
optional components
7