Tips And Tricks - Swann Advanced Series Manual

NOTE: It is important to have the camera upright relative to what you want the
camera to view - the cameras image cannot be flipped. If the camera is upside
down, so is the picture! For this reason, mounting the camera on the ceiling is
highly impractical. We suggest mounting the camera high on a wall, so that it can
be aligned to be upright relative to your subject.
6 6 6

Tips and Tricks

• There are two screw holes on the base of
• Using an appropriate type of screw or bolt,
• Then pivot the camera to face the direction
The lens on the front of your camera has adjustable focus.
Thus, it is important when installing your cameras to focus your
cameras.
To correctly focus the camera, it will need to be connected to
the monitor. Connect it nearby whilst installing the camera, or,
if the monitor and cables are already in place, get an assistant
to help you.
Turn clockwise to focus on something farther away
Turn counter-clockwise to focus on something nearer
NOTE: Be cautious when focusing on something closer to the camera
that you haven't gone past the optimum focus point. If you keep
turning the lens counter-clockwise, it will eventually unscrew entirely
and come out! This is highly undesirable, as it will directly expose the
imaging sensor. Moisture, dust and other fine particles and liquids
inside the camera housing will dramatically and negatively affect
performance.
each camera.
use these holes to affix the camera to a
surface.
of your choice.