Table of Contents
Advertisement
3. Receiving the product
3.1 Unpacking the product
Leave the product in the packing until you are ready
to install it. The packing is specially designed to
protect the product from damage.
•
Check that the product received is in accordance with the
order.
•
Check that the voltage, phase and frequency of the product
match the voltage, phase and frequency of the installation site.
•
During unpacking and prior to installation, make sure that the
product is not dropped or mishandled.
3.2 Inspecting the product
•
Check the product for defects and damage immediately after
receiving it.
•
If any equipment is damaged in transit, promptly report this to
the carrier's agent. Make complete notations on the freight bill.
3.3 Temporary storage after delivery
If the product is not to be installed and operated immediately after
receiving it, store it in a clean, dry area at a moderate ambient
temperature.
3.4 Applications
3.4.1 SLC and DLC pump control panels
Grundfos SLC and DLC pump control panels are designed for
level control, monitoring and protection of pumps in wastewater,
water supply and drainage systems.
SLC and DLC pump control panels are designed for emptying
(water removal) applications. (For boosting applications, see the
Grundfos BoosterpaQ product line.)
The SLC and DLC control panel product range comprises up to
45 A / 15 hp (P2), direct-on-line starting (DOL).
Fig. 1
Grundfos DLC pump control panel
4
Alarm
beacon
Dead-front
inner door
Front
door
Fig. 2
Outer front door and dead-front inner door
Fig. 3
HMI operating panel with keypad and text display
- Quick Links:
- Electrical Connection
Hide quick links:
Advertisement
Table of Contents
