Grundfos SLC Series Installation And Operating Instructions Manual page 33

Example, changing adjustable parameter soft-button blocks, SLC, float-controlled option
Step Action
• Press the " " or "
• In this example, "Pmp1Lead" is being viewed.
1
• The bottom line indicates the current state of the soft button switch.
• In this example, the soft button is set to "Off".
• To change the set value for the parameter, press the "OK" button.
2
• The cursor will appear on the switch parameter.
• To change the value of the soft button switch, press the " " or "
• In this example, the set value has been changed from "Off" to "On".
3
• When the desired value has been entered, press the "OK" button.
• The new value will now be in effect.
4
• Press the "ESC" button twice to exit parameter mode.
5
" button to view the parameter values.
Illustration
" button.
33