Grundfos SLC Series Installation And Operating Instructions Manual page 35

Example, changing adjustable parameter soft-button blocks, SLC transducer-controlled option
See the below example of the lead (duty) and lag (standby) pump settings and how to navigate through the screens.
Step Action
• Press the " " button repeatedly until the display does not change.
• To begin the configuration process, press the "ESC" button.
1
• Press the " " button to select "Set Param".
• Then press the "OK" button.
Warning
2
Do not select "Stop". Doing so may erase the panel programming, which cannot be
restored without the use of an EEPROM card, which is not included with the panel.
If "Stop" is selected accidentally, a confirmation screen will appear. Select "No" and
press the "OK" button immediately.
Illustration
35