Advertisement
Quick Links
Quad Monitor Desk Stand
Instruction Manual
SKU: STAND-V004Z
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v004z
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
309-278-5303
Chat live with an agent!
Advertisement
Related Manuals for Vivo STAND-V004Z
Summary of Contents for Vivo STAND-V004Z
- Page 1 Quad Monitor Desk Stand Instruction Manual SKU: STAND-V004Z Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v004z GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
-
Page 2: Package Contents
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. -
Page 3: Assembly Steps
ASSEMBLY STEPS STEP 1 Slide cable management clip (H) and base cover (I) on to bottom of pole (A). Thread pole (A) onto base (E) and tighten grub screws using 3mm allen key (J). STEP 2 Slide arm (C) and bracket (D) over top of pole and tighten using 5mm allen key (K). - Page 4 STEP 3 Slip cable management clip (H) over bottom of top pole (B). Use pole connector (F) to attach pole (B) to pole (A) as shown in diagram. Tighten grub screws using 3mm allen key (J). STEP 4 Slide bracket (D) over top of pole (B). Tighten using 5mm allen key (K).
- Page 5 STEP 5 Attach cable management clips (G) to to arm (C) as shown in diagram. STEP 6 Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of monitor, making sure to leave 3mm of threads exposed. Aline bolts (M-A or M-B) in VESA plate. Secure using two more bolts (M-A or M-B) and washers (M-C) in the bottom two holes.
- Page 6 STEP 7 Adjust tension in monitor bracket with 6mm allen key (L) as shown in diagram. +45 ° -45 ° STEP 8 Store Allen keys (L, J, K) in cable management clips (H) for future adjustment.
- Page 7 STEP 9 Do not move monitors past center of gravity. This could result in tipping. STEP 10 Adjust height of monitors using 5mm allen key (K) as shown in diagram. 360° 360° 360° 360°...
- Page 8 - 92% within < 3hr www.vivo-us.com : < 15 M AVG. RESOLUTION TIME (within office hrs) Chat live with an agent! : 5M 4S 309-278-5303 AVG. RESOLUTION TIME (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-V004Z and is the answer not in the manual?
Questions and answers