APPENDIX 2 Standard tightening torque for connections
Rear connection, Flush
Bolt Stud
Screw A
Insulation ring
Fig.1
Bar Stud
Screw E
Screw A
Insulation base
Fig.3
Table
List of standard tightening torque for connections (Note 1)
Type
MCCB
NF30-CS, MB30-CS
NF32-SW
NF63-CW, NF63-SW, NF63-HW
MB30-SW, MB50-CW, MB50-SW
NF125-CW, NF125-SW, NF125-HW
NF125-RW, MB100-SW
NF160-SW, NF160-HW, NF250-CW
NF250-SW, NF250-HW, MB225-SW
NF125-SGW, NF125-HGW
NF160-SGW, NF160-HGW
NF250-SGW, NF250-HGW
NF125-RGW, NF125-UGW,
NF250-RGW, NF250-UGW
NF400-CW, NF400-SW, NF400-SEW
NF400-HEW, NF400-REW
NF400-UEW(3P)
NF400-UEW(4P)
NF630-CW, NF630-SW
NF630-SEW, NF630-HEW
NF630-REW
NF800-CEW, NF800-SDW, NF800-SEW
NF800-HEW, NF800-REW
NF800-UEW (Note 2)
NF1000-SEW
NF1250-SEW, NF1250-SDW
NF1250-UR (Note 2)
NF1600-SEW, NF1600-SDW
Note 1) The suitable range of tightening torque shall be the corresponding numerical values in the table above ±20%. For detail, please refer to the handling