Mitsubishi Electric C Series Handling And Maintenance page 51

4Push the accessory into the circuit breaker to the point
where click sound is heard.
• With lead wires
For 600~800A frames with lead wires, fix the lead wires on
the side of the breaker by the attachment.
5Close the cover and tighten the screws.
Fastening torque
7Attach assembling the accessory, be sure to check for smooth operation before use.
Note 1. Please do not re-use what once removed cassette accessories after use. (Since the environment, the number of times
of use, and the storage situation are unknown, quality cannot be guaranteed.
2. The lead wire which is not used should perform insulated processing of the end of the lead wire.
49
➁
➀
• With the lead wire terminal block SLT
For exceeding six lead-wires
0.9〜1.2N ・ m
6Close the cover and tighten the screws.
Attach the name plate packed together onto a side of the
circuit breaker. (except with SLT type)
• Don't mount at ON, OFF position. The
accessory may fail normal operation or
may be broken.
click
sound
• The state that attached accessory