Ensure Safety; Safety And The Testo 510I/605I; Safety And The Testo 549I - TESTO 905i Instruction Manual

2 Safety and the environment
2.2.
2.2.1.
2.2.2.
2.2.3.
6
d Quality Products Online at:

Ensure safety

> Do not operate the instrument if there are signs of damage at
the housing, mains unit or feed lines.
> Do not perform contact measurements on non-insulated, live
parts.
> Do not store the product together with solvents. Do not use any
desiccants.
> Carry out only the maintenance and repair work on this
instrument that is described in the documentation. Follow the
prescribed steps exactly. Use only original spare parts
from Testo.
> Dangers may also arise from the systems being measured or
the measuring environment: Note the safety regulations valid in
your area when performing the measurements.

Safety and the testo 510i/605i

• Magnetic field
• May be harmful to those with pacemakers.
> Keep a minimum distance of 10 cm between pacemaker and
instrument.
Safety and the testo 605i
• Not for condensing atmospheres. For continuous application in
high humidity (> 80 %RH at ≤ 30 °C for > 12 h, > 60 %RH at >
30 °C for > 12 h), contact us via www.testo.com.
• The sensor must not be exposed to volatile chemicals such as
solvents (e.g. ketene, ethanol, isopropyl alcohol, toluene) or
organic compounds, especially in high concentrations and
corresponding gases, over a prolonged period of time.

Safety and the testo 549i

• Risk of injury due to pressurized, hot, cold or toxic
refrigerants/media!
> Only to be used by qualified staff.
> Wear protective goggles and safety gloves.
> Before applying pressure to the measuring instrument: always
fix the instrument tightly onto the pressure connection
> Comply with the permissible measuring range (0 to 60 bar). Pay
particular attention to this in systems with R744 refrigerant,
since these are frequently operated at higher pressures!
GlobalTestSupply
www. .com
sales@GlobalTestSupply.c