Connecting A Power Source - Samsung VP-MX10 User Manual

preparation

CONNECTING A POWER SOURCE

There are two types of power source that can be connected to your memory camcorder.
•
Do not use provided power supply units with other equipment.
•
- The battery pack: used for outdoor recording.
- The AC power adapter : used for indoor recording.
To Charge the Battery Pack
Be sure to charge the battery pack before you start using your memory
•
camcorder.
BatteryPackinstallation/ejection
It is recommended you purchase one or more additional battery packs to allow
continuous use of your memory camcorder.
Insertingthebatterypack
1. Slide and open the battery slot cover as shown in the diagram.
2. Insert the battery pack into the battery slot until it softly clicks.
Make sure that the SAMSUNG logo is facing up while the set is placed as
•
shown in the diagram.
3. Slide and close the battery slot cover
Ejectingthebatterypack
1. Slide and open the battery slot cover and push the battery lock.
Gently push the battery lock in the direction as shown in the diagram to eject
•
the battery out.
2. Pull the ejected battery out in the direction as shown in the diagram.
3. Slide and close the battery slot cover.
12_English
page 19
➥
Insert
Eject