Default Set; Version; Language Usb Connect; Demo - Samsung VP-MX10 User Manual

setting options

Default Set

You can initialize the memory camcorder settings to the factory defaults(initial settings at the factory).
Initializing the memory camcorder settings to factory defaults does not affect recorded images.
After resetting the memory camcorder, set "Date/TimeSet".

Version

You can see the firmware version information.
Language
You can select a desired language to display the menu and messages. ➥page 30
USB Connect
Connect the memory camcorder to a PC via a USB 2.0 cable and you can transfer your movie images from the
storage media, or use this camcorder as a webcam.
settings
"MassStorage" Transfers the data files with your memory camcorder and a PC. ➥page 75
Uses your memory camcorder as a webcam. ➥page 76
"PCCam"
The default setting is mass storage.
•
Before connecting the USB cable, check if the appropriate USB mode you want to use is selected.
•

Demo

Demonstration automatically shows you the major features that are included with your memory camcorder so that you
may use them more easily.
settings

"Off"

Disables the function
Activates demonstration mode and shows various features on the LCD screen.
- After it exit to the menu, the demonstration is automatically operated.
"On"
- Demonstration mode will resume if you operate any other function in STBY mode for about
6minute.
"AutoPowerOff " function does not operate during the demonstration mode.
68_English
page 31
➥
contents
contents
on-screen
display
None
None
on-screen
display
None
None