Inserting / Ejecting The Memory Card - Samsung VP-MX10 User Manual

Using the built-in memory (VP-MX10A/MX10AU/MX10AH only)
• Because this memory camcorder has an embedded 4GB memory, you don't need to buy any extra storage media.
So you can take or playback moving/recording conveniently.
Using a memory card (not supplied)
This memory camcorder has multi card slot for access to SDHC (Secure Digital High Capacity) and MMCplus.
•
You can use SDHC and MMC plus card on your memory camcorder.
•
- Some cards are not compatible depending on the memory card manufacturer and memory card type.
If you insert a memory card when the memory camcorder is on, the pop-up message will prompt you
•
automatically to select the storage type.
If there is no memory card inserted, only the built-in memory will be available.
•

INSERTING / EJECTING THE MEMORY CARD

Inserting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Insert the memory card into the memory card slot until it softly clicks
in the direction of the arrow shown in the diagram.
4. Close the cover.
Ejecting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Slightly push the memory card inwards to pop it out.
4. Pull the memory card out of the memory card slot and close the cover.
label pasting portion
English_33