Recording Movie Images - Samsung VP-MX10 User Manual

recording
Basic procedures to record movie images described below.

RECORDING MOVIE IMAGES

• Memory camcorder provides two Recordingstart/stop buttons. One is on the rear side of the camcorder and
the other one is on the LCD panel. Select the Recordingstart/stop button according to the use.
1. Turn the memory camcorder on.
Connect a power source to the memory camcorder. ➥pages 12,18
•
(A battery pack or an AC power adapter)
Slide the POWER switch downward to turn on the power. ➥page 21
•
• Set the appropriate storage media. (VP-MX10A/MX10AU/MX10AH only)
(If you want to record on a memory card, insert the memory card.)
2. Check the subject on the LCD screen.
3. Press the Recordingstart/stop button.
The recording indicator (
•
Pressing the Recordingstart/stop button again during recording
•
will set the memory camcorder to recording pause mode.
4. When recording is fi nished, turn the memory camcorder off.
Setting the display option of "16:9 Wide" does not imply wide angle (wide
•
aspect ratio) recording. Camera output, recording and playback signal is
formatted to 4:3 aspect ratio.
Please note that all movies recorded with this memory camcorder have
•
4:3 aspect ratio regardless of the display option (16:9 Wide/4:3). When it
is set to "16:9 Wide", the displayed picture may appear wider or rougher
than that of 4:3 screen aspect ratio. ➥pages 55,61
38_English
) will display and recording will start.
00:00:00/00:58:00
Recording...
STBY 00:00:30/00:57:30
120
MIN
120
MIN