Samsung VP-MX10 User Manual page 93

Recording
Symptom
Pressing the Recordingstart/
stop button does not start
recording.
The actual recording time is less
than the estimated time.
The recording stops automatically.
When recording a subject
illuminated by bright light, vertical
lines appear.
• Press the MODE button to set Movie Record mode (
• There is not enough free space to record on the built-in memory or memory
card.
• Check if the memory card is write-protected or if SDHC memory card is
inserted.
• The internal temperature of your camcorder is unusually high. Turn off your
camcorder and leave it for a while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your
•
camcorder and leave it for about 1 hour in a cool place.
The estimated recording time is calculated by some references.
•
When you record an object that moves fast, the actual recording time may be
•
shorten.
If you make a frequent recording or deletion of files, the performance of the
•
built-in flash memory will be deteriorated. In this case, format the built-in
memory again.
• The memory camcorder is unable to record these levels of brightness.
Explanation/Solution
).
page 79
➥
English_87