Samsung VP-MX10 User Manual page 6

precautions on use
IMPORTANT NOTE
Handletheliquidcrystaldisplay(LCD)withcare:
•
- The LCD is a very delicate display device: Do not press its surface with excessive force, hit it or prick it with a
sharp object.
- If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the
camcorder off, wait for a few moments, and then turn it on again.
- Do not place the camcorder with the open LCD screen down.
- Close the LCD monitor when not using the camcorder
Liquidcrystaldisplay:
•
- The LCD screen is a product of high precision technology. Out of the total pixels (approx. 112,000 pixels of an
LCD monitor ), 0.01% or less pixels may be out (black dots) or may remain lit as coloured dots (red, blue, and
green). This shows the limitations of the current technology, and does not indicate a fault that will interfere with
recording.
- The LCD screen will be slightly dimmer than usual when the camcorder is at low temperature, as in cold
areas, or right after the power is turned on. Normal brightness will be restored when the temperature inside
the camcorder rises. Note that the foregoing phenomena have no effect on the image in a storage media, so
there is no cause for concern.
Holdthememorycamcordercorrectly:
•
- Do not hold the memory camcorder by the LCD monitor when lifting it: the LCD monitor could detach and
the memory camcorder may fall.
Donotsubjectthememorycamcordertoimpact:
•
- This memory camcorder is a precision machine. Take great care that you do not strike it against a hard
object or let it fall.
- Do not use the memory camcorder on a tripod in a place where it is subject to severe vibrations or impact.
Nosandordust!
•
- Fine sand or dust entering the memory camcorder or AC power adaptor could cause malfunctions or
defects.
Nowateroroil!
•
- Water or oil entering the memory camcorder or AC power adaptor could cause electric shock, malfunctions
or defects.
• Heatonsurfaceofproduct:
- The surface of the memory camcorder will be slightly warm when using, but this does not indicate a fault.
vi_English