Subscribe to Our Youtube Channel
Related Manuals for VOLYA FERMER-3,5
Summary of Contents for VOLYA FERMER-3,5
- Page 1 Технический паспорт FERMER-3,5 honeycomb polycarbonate greenhouse (EURO) any length multiple of 2.1 min 4.2 m width 3,5 m Technical certificate р. 2-7 Assembly manual р. 7-29...
- Page 2 4.2 m is 14.7 m2. Height of the installed 1880х120х85 13,0 frame is 3.25 m. 7 PACKAGE FERMER-3,5 (elements and strips for doors) 8 PACKAGE FERMER-3,5 (end side brace elements) The frame of the greenhouse is made of galvanized iron 1 mm thick and is to be 2360х85х65...
- Page 3 Technical certificate Technical certificate Extra package base DETAILED PARTS LIST “FRAME” (4.2 M) Тable 3 Ridge shape 2,10 marking name length (m) quantity (pcs) Top draw band 6,76 5 PACKAGE FERMER Bottom draw band 0,60 Stay brace 1,98 Bottom arc base sheet 0,83 10ц...
-
Page 4: Warranty Liabilities
Date of manufacture: materials. Manufacturer: VOLYA LLC, Do not use sulphur cartridges for disinfecting greenhouse per. Severny, 8, Dubna, Moscow region, 141983, Russia. against fungal and bacterial agents in order to prevent The manufacturer bears responsibility for quality of products in accordance with RF CC. -
Page 5: Installation Sequence
Manual Manual “FERMER” GREENHOUSE INSTALLIATION MANUAL INSTALLATION SEQUENCE Introduction Stage name page The general view of the frame is presented in fig. 1. The frame is assembled from End wall assembly 12-14 the shape numbered parts. Medium shape shelves are facing the covering.. Installation of runners on the end wall Some parts have free holes Indexes:... - Page 6 Manual Manual GENERAL VIEW OF THE GREENHOUSE FRAME WITH EXTENDING GENERAL VIEW OF THE GREENHOUSE FRAME WITH EXTENDING INSERTS INSERTS Г И А Б В 2к Б А К укос В Г Д Е укос Д Ж Fig. 1 Е 2кн...
- Page 7 Manual Manual INSTALLATION SEQUENCE INSTALLATION SEQUENCE В STAGE 1 Д Е А Assembly of the end wall. washer 6 Assembly is carried out according to the fig.1.1 bolt М6х14 Е П11 Б П12д Ж П-9 Sunken screw bolt М6х14 М6х10 washer 6 10ц...
- Page 8 Manual Manual INSTALLATION SEQUENCE INSTALLATION SEQUENCE STAGE 3 fig. 1.8 General view of the end Assembly of the power arc - places of wall and location of the installation of angles angles for fastening of for further fastening Assembly of the power of covering to an end polycarbonate.
- Page 9 Manual Manual INSTALLATION SEQUENCE INSTALLATION SEQUENCE STAGE 6 STAGE 5 fig. 5.1 End section installation Extension of the frame length. In the variant of installation of the Assembled power arc (or the power arc that has greenhouse without a other end wall, depending already been connected, foundation, marking on the needed length...
- Page 10 Manual Manual DOORS ASSEMBLY DOORS ASSEMBLY 14д Г ЭТАП 7 А 12дл 13д Doors assembly. Б 13д В Doors are assembled in Е 14д the same way. Joints are shown in the figures. 13д 14д Strips and other surface mounted components are Д...
- Page 11 Manual Manual DOORS ASSEMBLY CUTTING LIST OF COVERING OF AN END Reminder fig. 7.1 Arrangement of 1280 angles for fastening of polycarbonate on the doors. 1280 1280 STAGE 8 Installation of covering Install honeycomb polycarbonate with a specified side facing outwards (sunward);...
- Page 12 Manual Manual FASTENING OF COVERING FASTENING OF COVERING washer 32х6,3 Fasten the pieces of Fig. 8.5 covering on the end to 2к, 2кн - places of fastening the angles with the use of of door seals. washers and self-tapping self-tapping screw screws (fig.8.2).
- Page 13 Manual Manual FASTENING OF COVERING FASTENING OF COVERING First install all the joining plates and tingles on arcs small arc base sheet Arc base bolt М6х14 sheet tingle washer 6 nut М6 Do not tighten up! bolt М6х14 bolt М6х20 (from the base package) washer 32х6 (from the base package) )
- Page 14 Manual Manual FASTENING OF COVERING FASTENING OF COVERING Top draw band washer 32х6 (from the base package) bolt М6х20 Top draw band main shape (from the base washer 6 tingle package) bottom (from the base draw package) band nut М6 bolt М6х14 (from the base package)
- Page 15 MANUFACTURER: LLC «VOLYA», DUBNA, MOSCOW REGION. phone/fax: (496) 217-17-17, (495) 745- 85-59 www.perchina.ru e-mail: info@perchina.ru THIS MANUAL CANNOT BE REPRODUCED IN ANY FORM, IN WHOLE OR IN PART, WIHOUT AN EXPRESS WRITTEN PERMISSION OF "VOLYA" COMPANY...
Need help?
Do you have a question about the FERMER-3,5 and is the answer not in the manual?
Questions and answers