Using Ping On A Macintosh - SMC Networks D3CM1604 Administrator's Manual

5. When you finish, type exit at the command prompt and press Enter to close the window.

Using Ping on a Macintosh

To ping on a Macintosh:
1. Click on Go > Applications > Utilities.
2. Click on Network Utility, and then click the Ping tab. A page similar to the one in Figure
5-3 appears.
3. In the first field, enter the IP address you want to ping.
4. Using the options below the field, select an unlimited number of pings or send a specific
number of pings.
5. Click the Ping button. If you receive:
reply from..., the destination IP address was contacted successfully.

request timed out, the destination IP address was not contacted successfully.

destination host unreachable, you are not on the same subnet as the destination

address. Change your IP address to communicate with the destination address.
Troubleshooting Procedures
Figure 5-3. Ping Tab on the Network Utility Page
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
54