SMC Networks D3CM1604 Administrator's Manual page 12

3. Connect the power cord to the cable modem and to a wall power outlet.
WARNING: Use only the supplied power cord! Using a different power cord may
damage your unit and void the warranty.
4. Confirm that the front panel POWER LED goes ON.
5. Wait until the DS, US, and ONLINE LEDs stop flashing and the ONLINE LED stays ON,
indicating that the device is online. If the ONLINE LED does not go ON in 5 minutes,
contact your Internet Service Provider.
6. (Optional): Log in to the D3CM1604 to configure additional device settings.
a. Open a Web browser page and enter the cable modem IP address in the address bar.
b. At the Login screen, enter the following case-sensitive login information:
–
username: mso
–
password: msopassword
Getting to Know the Cable Modem
Figure 1-1. Hardware Connections
D3CM1604 DOCSIS 3.0 Cable Modem Administrator Manual
12