Comrex BRIC-Link Product Manual page 60

FigUre 51 bULK device SeLection
After completing this step, specify whether to target the units that are a part of a Contact List or the units that are
Following that list (i.e., the option in the yellow-outlined box on the middle-left of the above figure).
Note: Bulk Actions can ONLY be performed on ENTIRE Contact Lists. They CANNOT be performed on individual
codecs or on a portion of a Contact List. This means that a Bulk Action will affect ALL of the codecs that are either
part of a Contact List or are Following that list.
To only change a subset of the codecs in a list, try creating a new Contact List with only those units in it and then
perform the Bulk Action using that list.
Step 3: Identify the List That Will Be Changed
Lastly, choose the Contact List that will be affected by this Bulk Action. This will be the list that will have codecs
added to it or removed from it, or which will have codecs Follow it or stop Following it. When completed, press the
Send Bulk Action button (Figure
FigUre 52 Send bULK Action
60
52).