Comrex BRIC-Link Product Manual page 53

Note: MultiRack instances must be added to Switchboard individually. Instance 1 Switchboard ID is the same as the
unit MAC Address, while Instances 2-5 use the same MAC address, with a suffix added to designate the instance
Switchboard ID. As an example, if the primary Ethernet MAC address on a MultiRack is 00:01:40:c0:0d:15, that's the
ID input for MultiRack instance #1. Instance #2 is added as 00:01:40:c0:0d:15-2, instance #3 uses -3, etc.
creAting USerS
It is possible to add additional Switchboard users who can access the Switchboard interface. This is done via the
Users tab at the top of the main codec list (Figure 37).
This allows for the creation of accounts for users that can
later be deleted. Several user accounts can be created with unique passwords.
FigUre 37 USerS tAb
contAct LiStS
In some situations, it might not be desirable for every codec to see the Switchboard status of every other codec. To
help filter what's displayed on a codec's interface, Switchboard has implemented the concept
of Contact Lists. Contact Lists contain a subset of a user's codec fleet on their account (Figure 38). Users can create
multiple Contact Lists that consist of different subsets. With the exception of Shares (discussed next), only units
within a user's Switchboard account may be assigned to Contact Lists.
FigUre 38 contAct LiSt
53