Comrex BRIC-Link Product Manual page 21

Figure 8 netWork conFiguration
UPDATING FIRMWARE USING DEVICE MANAGER
While Device Manager is open and synced to a codec, it's a good time to check to see if an update is available for
the product.
To do this, select the Firmware tab, shown in Figure 9 below.
The unit's current firmware and the most recent version of firmware for the unit are listed at the top of the tab (1 in
Figure 9). If the device isn't running the latest version of firmware, click the "Get Latest Version" button (2 in Figure
9) and download it. (If the unit's Firmware is current, the button will be grayed out.) Next, select "Update Device"
(3 in Figure 9), choose the .upd file just downloaded and click OK, and Device Manager will then update the unit's
firmware.
21