7
Setup and Reset
4
If an HDMI cable is connected, press [
change to
HDMI
7.1.6 USB Super Charging
A source device's battery can be charged quickly via USB 3.0 port on the product.
Data transmission is not available if
To enable standard charging or data transmission, set
The input source does not need to be changed.
Configuring USB Super Charging
1
m
Press [
] on the product.
2
Press [
] to move to SETUP&RESET, and press [
3
Press [
] to move to HUB, and press [
4
Press [
] to move to
will appear.
Off: Disable
1
Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.
Quick battery charging is available only through one USB 3.0 port (it is found on the left side
and is the port closest to you when facing the front of the monitor).
2
Ports: Enable two USB 3.0 ports for quick battery charging.
5
Press [
] to move to the option you want, and press [
6
The selected option will be applied.
] to move to
mode.
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Return
USB Super Charging
USB Super
Charging, and press [
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Return
USB Super
Charging.
HDMI
and press [
Off
Disconnected
Disconnected
Disconnected
Connected
Move
Enter
is on.
USB Super Charging
] on the product.
] on the product.
] on the product. The following screen
Off
Disconnected
Disconnected
Disconnected
Disconnected
Off
1 Port
2 Ports
Move
Enter
] .
]. The input source will
to off.
70
7 Setup and Reset