Table of Contents
Advertisement
Eco Saving Plus
Reduce energy consumption compared to consumption at the maximum brightness level.
― This menu is not available when
Eye Saver Mode
― This menu is not available when
Local Dimming
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: Saves up to 25 % energy compared to the maximum brightness.
•
High: Saves up to 50 % energy compared to the maximum brightness.
Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to
→
System
and set
Off Timer
is enabled.
is enabled.
is set to On.
Off Timer
is set to automatically activate 4 hours after the
to Off.
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in HDMI1, HDMI2,
DisplayPort
mode activates, press the JOG button to display the function-button screen and then select the
can select
PC
or AV.
USB Super Charging
Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
USB Super
Charging: Turn on
USB Super Charging
― Super charging is available via the
port. Use this port to charge devices faster than using a normal
USB port. The charging speed may vary, depending on the connected device.
― Quick battery charging may not be supported and/or charging may take more time on some mobile devices.
― When super charging is turned off for the
transfer.
― If a USB 2.0 or lower device is connected to the
impossible, but it is possible if a USB 3.0 device is connected.
※ These ports may not be compatible with new USB devices that may be released in the future.
― If a device, such as a mouse, keyboard or memory storage device, is connected to the
device is USB 2.0 or lower, turn off super charging.
― If super charging is turned on using the OSD settings menu, all devices connected to USB ports 1 through 2 on
the monitor are re-recognized. This ensures optimum charging.
※ Before turning on super charging, close all files on storage devices connected to USB ports.
mode and the screen says
Check Signal Cable
or power saving
mode.
port, use this port for regular speed charging and data
port and super charging is turned on, data transfer is
port and the
icon. You
39
Advertisement
Table of Contents
