Samsung C23A750X User Manual page 32

2
Using "HUB Monitor"
4
Double-click the hub monitor to open the following screen.
If a connection is established between the product and PC, [
bars as shown below and the product will display the PC screen. If [
connection is not established between the product and PC.
5
Right-click in the
Disconnect: Disconnect Wireless between the product and PC.
Set as
detected. A star will appear beside the monitor icon if the product is set as the default monitor.
Ensure the wireless ID below
screen.
Wireless ID
program reads the ID and identifies each of nearby monitors. The ID is shown in the
"SAMSUNG HUB Monitor Setup" program and in the lower part of the
A different ID (number) is displayed for each product. (The ID is displayed as shown below.)
Connected Monitor to open the menu page as below.
default: Give first priority to the product to connect to the PC once a Wireless signal is
"Monitor
is a unique ID assigned to a monitor. The "SAMSUNG HUB Monitor Setup"
] will appear over the signal intensity
device" matches the wireless ID on the
2 Using "HUB Monitor"
] does not appear, the
HUB menu
HUB menu.
32