Setup And Reset; Auto Wireless Detection; Wireless Connection - Samsung C23A750X User Manual

7

Setup and Reset

7.1 HUB
Configure the settings to use the HUB function on the product.
Refer to "2.1 About "HUB Monitor"" for details about how to use the
To open the

7.1.1 Auto Wireless Detection

If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal
and change the input source to
Configuring Auto Wireless Detection
1
m
Press [ ] on the product.
2
Press [
3
Press [
4
Press [
will appear.
Off: Deactivate the auto wireless detection mode.
On: Automatically detect a Wireless USB signal and change the input source to
mode.
5
Press [
6
The selected option will be applied.

7.1.2 Wireless Connection

You can view the status of the Wireless USB connection between the product and a PC.
Select the Wireless Connection
The connection status will be shown even when the input source is not
Selecting
input source to
HUB settings screen, press
Wireless USB
] to move to SETUP&RESET
] to move to HUB and press [
] to move to Auto Wireless Detection
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Return
] to move to the option you want and press the [
option. The input source will change to
Wireless Connection when a Wireless USB connection is established will change the
Wireless USB mode.
HUB on the stand.
mode.
and press [ ] on the product.
] on the product.
and press [ ] on the product. The following screen
Off
On
Disconnected
Disconnected
Disconnected
Adjust Enter
].
HUB function.
Wireless USB
Wireless USB mode.
Wireless USB mode.
7 Setup and Reset
67