Download  Print this page
Most useful pages: More

Advertisement

User Manual

SyncMaster
C23A750X / C27A750X
The color and the appearance may differ depending on
product, and the specifications are subject to change without prior
notice to improve the performance.
Downloaded from ManualMonitor.com Manuals

Advertisement

Table of Contents

   Related Manuals for Samsung SyncMaster C27A750X

   Summary of Contents for Samsung SyncMaster C27A750X

  • Page 1: User Manual

    User Manual SyncMaster C23A750X / C27A750X The color and the appearance may differ depending on product, and the specifications are subject to change without prior notice to improve the performance. Downloaded from ManualMonitor.com Manuals...
  • Page 2: Before Using The Product

    2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
  • Page 3: Before Using The Product

    Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.
  • Page 4: Securing The Installation Space

    High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (82page) if the inside of the monitor needs cleaning. (service fee will be charged). Safety Precautions Electricity and Safety The following images are for reference only.
  • Page 5 Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result. Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. Do not touch the power plug with wet hands.
  • Page 6: Installation

    The product may become damaged by an electric shock. Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.
  • Page 7 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury. Using the product in an area with excess vibration may damage the product or cause a fire.
  • Page 8: Operation

    SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center (82page) before installation if you want to install the product at such a place. Operation Warning High voltage runs through the product.
  • Page 9 Before Using the Product Do not put a heavy object, toy, or sweets on top of the product. The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury. During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable.
  • Page 10 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center (82page). Product failure, an electric shock or fire may result.
  • Page 11 Before Using the Product Do not let water enter the DC power device or get the device wet. An electric shock or fire may result. Avoid using the product outdoors where it can be exposed to rain or snow. Be careful not to get the DC power adapter wet when you wash the floor. Do not put the DC power adapter near to any heating apparatus.
  • Page 12: Correct Posture To Use The Product

    Before Using the Product Exercise caution when adjusting the product angle or stand height. Otherwise, children's fingers or hands may become stuck and injured. Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product. Product failure or personal injure may result.
  • Page 13: Table Of Contents

    About "Central Station" STATION" Software Installation for Using "Central Station" Installing "SAMSUNG Central Station Setup" Connecting the Product to a PC to Use "Central Station" Connecting to a PC via Wireless USB Connecting to a PC via the USB Cable Downloaded from ManualMonitor.com Manuals...
  • Page 14 Table Of Contents Utilizing "Central Station" Using the Product as a USB HUB Connecting to a LAN CONNECTING AND Before Connecting Pre-connection Checkpoints USING A SOURCE Connecting and Using a PC DEVICE Connecting to a PC Driver Installation Setting Optimum Resolution Changing the Resolution Using a PC Connecting to a Video Device Connection Using an HDMI Cable...
  • Page 15 Table Of Contents HDMI Black Level CONFIGURING Configuring Red TINT Green Configuring Green Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma RESIZING OR Auto Adjustment Configuring the Auto Adjustment Settings RELOCATING THE Size SCREEN Changing the Picture Size Horizontal Position Configuring H-Position Vertical Position...
  • Page 16 Table Of Contents SETUP AND Auto Wireless Detection RESET Wireless Connection USB Connection Analog HDMI USB Super Charging Wireless ID Eco Saving Configuring Eco Saving Menu Transparency Changing Menu Transparency Language Changing the Language PC/AV Mode Configuring PC/AV Mode Auto Source Configuring Auto Source Display Time Configuring Display Time...
  • Page 17 MENU AND Configuring Brightness in the Startup OTHERS Screen Configuring Volume in the Startup Screen TROUBLESHOOTI Requirements Before Contacting Samsung Customer Service Center NG GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General...
  • Page 18: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the Styrofoam from the product. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
  • Page 19: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing. The appearance of the components and items sold separately may differ from the image shown. Components Quick Setup Guide Warranty User Manual Wireless Connection Dongle Power cable DC power adapter...
  • Page 20: Parts

    Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. This is a touch-type button. Tap the button lightly with a finger. If the MENU button is not visible, lightly tap the area around the [ ] button.
  • Page 21 Preparations Icons Description Open or close the onscreen display (OSD) menu, or return to the last menu. OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. To lock the OSD control, press the MENU button [ ] for five seconds.
  • Page 22: Reverse Side

    Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to a PC using the D-SUB cable. Connects to a network using the LAN cable. Connects to a PC via a USB cable.
  • Page 23: Left Side View

    Preparations 1.2.3 Left Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. HDMI Port Description Connects to an audio output device such as headphones. HDMI Connects to a source device using an HDMI cable.
  • Page 24: Right Side View

    Preparations 1.2.4 Right Side View The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connects to a source device via a USB cable. Compatible with a USB cable version 2.0 or lower.
  • Page 25: Adjusting The Product Tilt And Height

    Preparations 1.2.5 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. The monitor tilt and height can be adjusted. Hold the top center of the product and adjust the tilt carefully. Downloaded from ManualMonitor.com Manuals 1 Preparations...
  • Page 26: Using "central Station

    Insert the installation CD into the CD-ROM drive. Click the "SAMSUNG Central Station Setup" installation program. If a software installation window does not appear in the main screen, install using the "SAMSUNG Central Station Setup" execution file on the CD-ROM.
  • Page 27: Connecting The Product To A Pc To Use "central Station

    "Samsung Wireless Monitor". To delete the software, go to Start Settings Control Panel and double-click Add or Remove Programs on the PC. Select "Samsung Wireless Central Station" and "Samsung Wireless Monitor" from the list and click Change/Remove. Connecting the Product to a PC to Use "Central Station"...
  • Page 28: Connecting To A Pc Via Wireless Usb

    Using "Central Station" according to this priority, from left to right: Wireless USB mode > mode > Analog mode > HDMI mode. If the product connects to a PC for the first time, the optimum resolution (1920 x 1080) will be selected automatically and a message will appear confirming that you want to set the display to extended mode.
  • Page 29 This product cannot connect to multiple PCs wirelessly at the same time and vice versa. Connecting to a PC via Wireless USB Install "Samsung Central Station Setup" on the PC, and attach the dongle to the USB port on the Press [ ] to change the input source for the product to Wireless.
  • Page 30 Using "Central Station" Double-click the hub monitor to open the following screen. If a connection is established between the product and PC, [ ] will appear over the signal intensity bars as shown below and the product will display the PC screen. If [ ] does not appear, the connection is not established between the product and PC.
  • Page 31: Connecting To A Pc Via The Usb Cable

    Using "Central Station" connected to another input source (Analog/USB/HDMI). The Connecting to PC… message will be displayed while connection is attempted. To establish a Wireless USB connection when Auto Wireless Detection is set to Off, press [ ] to switch Wireless USB mode.
  • Page 32: Using The Product As A Usb Hub

    Using "Central Station" 2.4.1 Using the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same time. A PC cannot connect to multiple source devices at the same time as it has a limited number of input/ output ports available.
  • Page 33: Connecting To A Lan

    Using "Central Station" Connect a mobile IT device such as an MP3 player or smart phone to the product when connected to a PC. This allows you to use the device from the PC or charge the battery on the device. To charge the battery of a device, be sure to connect the device to the blue USB 3.0 port on the left side of the product.
  • Page 34 Using "Central Station" Connecting to a LAN via USB cable USB CABLE This product cannot connect to multiple source PCs at the same time and vice versa. Downloaded from ManualMonitor.com Manuals 2 Using "Central Station"...
  • Page 35: Connecting And Using A Source Device

    Connecting and Using a Source Device Before Connecting 3.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
  • Page 36: Device 36

    Connecting and Using a Source Device Connecting and Using a PC 3.2.1 Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (Analogue type) D-SUB Connect the D-SUB cable to the D-SUB port on the back of the product and the RGB port on the Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC.
  • Page 37: Connecting And Using A Source Device

    Connecting and Using a Source Device Connection Using an HDMI Cable (Digital Type) HDMI Connect an HDMI cable to the HDMI port on the side of the product and the HDMI port on the PC. Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC.
  • Page 38: Driver Installation

    An installation driver is contained on the CD supplied with the product. If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/sec) and download the file. Insert the user manual CD provided with the product into the CD-ROM drive.
  • Page 39: Setting Optimum Resolution

    Connecting and Using a Source Device 3.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz Follow the above settings to set the resolution.
  • Page 40: Changing The Resolution Using A Pc

    Connecting and Using a Source Device 3.2.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 41 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. Downloaded from ManualMonitor.com Manuals 3 Connecting and Using a Source Device...
  • Page 42 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. Downloaded from ManualMonitor.com Manuals 3 Connecting and Using a Source Device...
  • Page 43: Connecting To A Video Device

    Connecting and Using a Source Device Connecting to a Video Device The product can be connected to a video device. Connecting parts may differ in different products. 3.3.1 Connection Using an HDMI Cable HDMI Connect an HDMI cable to the HDMI ports on the product and video device. Press [ ] to change the input source to HDMI.
  • Page 44: Screen Setup

    ] on the product. Press [ ] to move to Angle and press [ ] on the product. The following screen will appear. MAGIC SAMSUNG MAGIC Angle Lean Back Mode 1 SAMSUNG MAGIC Bright Lean Back Mode 2 Standing Mode Side Mode...
  • Page 45: Bright

    [ ] on the product. Press [ ] to move to Bright and press [ ] on the product. The following screen will appear. mode MAGIC SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright Custom Standard SAMSUNG Game MAGIC Color Cinema...
  • Page 46: Configuring Color

    ] to move to the option you want and press the [ The selected option will be applied. 4.1.3 Configuring Color Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. This menu is not available when Angle is enabled.
  • Page 47: Brightness

    Screen Setup Press [ ] to move to Color and press [ ] on the product. The following screen will appear. MAGIC SAMSUNG MAGIC Angle SAMSUNG MAGIC Bright Custom SAMSUNG MAGIC Color Demo Full Intelligent Return Adjust Enter Off: Disable Color.
  • Page 48: Contrast

    Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. This option is not available when Color is in Full Intelligent mode. 4.3.1 Configuring Contrast Press [ ] on the product.
  • Page 49: Coarse

    Screen Setup Press [ ] to move to Sharpness and press [ ] on the product. The following screen will appear. PICTURE MAGIC Brightness Contrast Sharpness 2200 Coarse Fine Faster Response Time Return Adjust Enter Adjust the Sharpness using the [ ] button.
  • Page 50: Fine

    Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. Only available in Analog mode. 4.6.1 Adjusting Fine Press [ ] on the product. Press [ ] to move to Picture and press [ ] on the product. Press [ ] to move to Fine and press [...
  • Page 51: Hdmi Black Level

    Screen Setup Press [ ] to move to Response Time and press [ ] on the product. The following screen will appear. PICTURE MAGIC Brightness Contrast Sharpness 2200 Coarse Normal Fine Faster Response Time Fastest Return Adjust Enter Press [ ] to move to the option you want and press theto move to the option you want and press the [ The selected option will be applied.
  • Page 52: Configuring Tint

    Configuring Tint Adjust the tint of the screen. This option is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This option is not available when Color is in...
  • Page 53: Blue

    Configuring Tint Press [ ] to move to Green and press [ ] on the product. The following screen will appear. COLOR Green Blue Normal Color Tone Mode1 Gamma Return Adjust Enter Adjust the Green using the [ ] button. Blue Adjust the value of the color blue in the picture.
  • Page 54: Color Tone

    Configuring Tint Color Tone Adjust the general color tone of the picture. This option is not available when Angle is enabled. This option is not available when Color is in Full Intelligent mode. Only available in Analog HDMI mode. 5.4.1 Configuring the Color Tone Settings Press [ ] on the product.
  • Page 55: Gamma

    Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. This option is not available when Angle is enabled. 5.5.1 Configuring Gamma Press [ ] on the product. Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma...
  • Page 56: Resizing Or Relocating The Screen

    Resizing or Relocating the Screen Auto Adjustment This function can be used to automatically adjust the Coarse, Fine and position settings. This function can be used to automatically detect and remove noise on the screen and correct the screen position. This function will automatically run if the screen resolution is changed.
  • Page 57: Horizontal Position

    Resizing or Relocating the Screen Auto: Display the picture according to the aspect ratio of the input source. Wide: Display the picture in full screen regardless of the aspect ratio of the input source. mode SIZE&POSITION Auto Adjustment Image Size 4 : 3 16 : 9 H-Position...
  • Page 58: Vertical Position

    Resizing or Relocating the Screen Press [ ] to move to H-Position and press [ ] on the product. The following screen will appear. SIZE&POSITION Auto Adjustment Wide Image Size H-Position V-Position Menu H-Position Menu V-Position Return Adjust Enter Adjust the H-Position using the [ ] button.
  • Page 59: Menu H-position

    Resizing or Relocating the Screen Menu H-Position Move the menu position to the left or right. 6.5.1 Configuring Menu H-Position Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu H-Position...
  • Page 60: Menu V-position

    Resizing or Relocating the Screen Menu V-Position Move the menu position up or down. 6.6.1 Configuring Menu V-Position Press [ ] on the product. Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Menu V-Position and press [...
  • Page 61: Setup And Reset

    Setup and Reset Configure the settings to use the HUB function on the product. Refer to "2.1About "Central Station"" for details about how to use the function. To open the settings screen, press on the stand. 7.1.1 Auto Wireless Detection If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal and change the input source to Wireless USB...
  • Page 62: Usb Connection

    Setup and Reset Activating Wireless Connection Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. A message will appear indicating that a Wireless USB connection is established or disconnected.
  • Page 63: Analog

    Setup and Reset USB Connection option is disabled if a USB cable is not connected. 7.1.4 Analog You can view the Analog cable connection status between the product and a PC. The connection status will be shown even when the input source is not Analog mode.
  • Page 64: Usb Super Charging

    Setup and Reset If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source will change to HDMI mode. Auto Wireless Detection Disconnected Wireless Connection Disconnected USB Connection Disconnected Analog Connected HDMI USB Super Charging Wireless ID...
  • Page 65: Wireless Id

    ID assigned to a monitor. The "Samsung Central Station Setup" program reads the ID and identifies each of nearby monitors. The ID is shown in the "Samsung Central Station Setup" program and in the lower part of the menu.
  • Page 66: Menu Transparency

    Setup and Reset Menu Transparency Set the transparency for the menu windows: 7.3.1 Changing Menu Transparency Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Menu Transparency and press [ ] on the product.
  • Page 67: Pc/av Mode

    Setup and Reset Press [ ] to move to Language and press [ ] on the product. The following screen will appear. SETUP&RESET Eco Saving Menu Transparency Language PC/AV Mode Auto Source Display Time Return Move Enter Press [ ] to move to the option you want and press the [ The selected option will be applied.
  • Page 68: Auto Source

    Setup and Reset Auto Source Activate Auto Source. 7.6.1 Configuring Auto Source Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Auto Source and press [ ] on the product.
  • Page 69: Key Repeat Time

    Setup and Reset Press [ ] to move to Display Time and press [ ] on the product. The following screen will appear. SETUP&RESET Eco Saving Menu Transparency English Language PC/AV Mode 5 sec Auto Source 10 sec 20 sec Display Time 200 sec Return...
  • Page 70: Off Timer On/off

    Setup and Reset Off Timer On/Off Enable or disable the off timer that automatically powers off the product. 7.9.1 Configuring Off Timer On/Off Press [ ] on the product. Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Off Timer On/Off...
  • Page 71: Reset

    Setup and Reset Press [ ] to move to Off Timer Setting and press [ ] on the product. The following screen will appear. SETUP&RESET Acceleration Key Repeat Time Off Timer On/Off Off Timer Setting 10 h Reset Return Adjust Enter Press [ ] to configure...
  • Page 72: Information

    INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 8.1.1 Displaying INFORMATION Press [ ] on the product. Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR Analog SIZE&POSITION 48.2kHz 60Hz NN...
  • Page 73: Configuring Volume In The Startup Screen

    INFORMATION Menu and Others Configuring Volume in the Startup Screen Adjust Volume using the [ ] button in the startup screen where there is no on screen display menu available. Only available in HDMI mode. Press [ ] in the startup screen. The following screen will appear. Volume Exit Adjust...
  • Page 74: Troubleshooting Guide

    Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 75: Troubleshooting Guide

    Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (81page).
  • Page 76 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting.
  • Page 77 Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Select Control Panel Appearance and Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Panel Display Settings...
  • Page 78 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and resolution? Themes Display Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display Settings and adjust the resolution. Windows Vista: Go to Control Panel Appearance and Personalization Personalize...
  • Page 79: Specifications

    Specifications 10.1 General Model Name C23A750X C27A750X LCD Panel Size 23.0 inch / 58cm 27.0 inch / 68cm Display area 286.74 mm (V) x 509.76 mm (H) 336.15 mm (V) x 597.6 mm (H) 11.3 inches (V) x 20.1 inches (H) 13.2 inches (V) x 23.5 inches (H) Synchroni Horizontal...
  • Page 80: Powersaver

    Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799 10.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time.
  • Page 81: Standard Signal Mode Table

    Specifications 10.3 Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
  • Page 82: Appendix

    Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-"SAMSUNG" (726-7864) http://www.samsung.com CANADA 1-800-"SAMSUNG" (726-7864) http://www.samsung.com MEXICO 01-800-"SAMSUNG "(726-7864) http://www.samsung.com Latin America ARGENTINA 0800-333-3733 http://www.samsung.com...
  • Page 83 BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com DENMARK 70 70 19 70 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com...
  • Page 84 Appendix Europe SERBIA 0700 Samsung (0700 726 7864) http://www.samsung.com SLOVAKIA 0800-"SAMSUNG "(726-7864) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 http://www.samsung.com 678) SWEDEN 0771 726 7864 ("SAMSUNG") http://www.samsung.com SWITZERLAND 0848-"SAMSUNG" (7267864, http://www.samsung.com/ch CHF 0.08/min) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com...
  • Page 85 Morocco 080 100 2255 http://www.samsung.com Oman 800-SAMSUNG (726-7864) http://www.samsung.com Saudi Arabia 9200-21230 http://www.samsung.com TURKEY 444 77 11 http://www.samsung.com U.A.E 800-"SAMSUNG "(726-7864) http://www.samsung.com Africa NIGERIA 0800 - SAMSUNG (726-7864) http://www.samsung.com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com Downloaded from ManualMonitor.com Manuals Appendix...
  • Page 86: Correct Disposal Of This Product

    Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
  • Page 87: Terminology

    Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB refers to a device that is a common connection point for multiple devices connected over a network.
  • Page 88 Appendix the screen refreshes 60 times per second. The screen scanning rate depends on the performance of the graphics cards in your PC and monitor. Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are transmitted in horizontal lines, which are then arranged vertically to create an image.
  • Page 89 Key Repeat Time Connecting Headphones Connecting the Product to a PC to Use "Central Station" Connecting to a Video Device Language Contact SAMSUNG WORLDWIDE Contrast Copyright MAGIC Correct Disposal of This Product Menu H-Position Correct posture to use the product...
  • Page 90 Off Timer Setting Using "Central Station" Utilizing "Central Station" Parts PC/AV Mode PowerSaver Vertical Position Preparations Q & A Requirements Before Contacting Samsung Customer Service Center Reset Resizing or Relocating the Screen Response Time Safety Precautions Screen Setup Setup and Reset Sharpness Size Software Installation for Using "Central Station"...
  • Page 91 BN46-00037A-03 Downloaded from ManualMonitor.com Manuals...

This manual is also suitable for:

Syncmaster c23a750x

Comments to this Manuals

Symbols: 0
Latest comments: